Pocket Style Fender Flares
For Ford Ranger PX3 2018–2021 | 6-Piece Set | 35mm Extent
Aftermarket Product: This is an aftermarket accessory and is not Ford genuine parts.
Trademark Disclaimer: This product is not manufactured, sponsored, endorsed or authorised by Ford. The Ford and Ranger names are used solely to identify vehicle compatibility. All trademarks remain the property of their respective owners.
⚠️ Please Confirm Fitment Before Ordering
Designed for selected Ford Ranger PX3 models from 2018 to 2021. Please compare your vehicle’s guard shape, body style and existing accessories with the listing photos before purchasing.
✨ Quick Specs
- ✔️ Fitment: Ford Ranger PX3 2018–2021
- ✔️ Quantity: 6-Piece Set
- ✔️ Style: Pocket Style Fender Flares
- ✔️ Coverage: Approx. 35mm Wider Look / Extent
- ✔️ Material: Tough Automotive-Grade ABS Plastic
- ✔️ Finish: Matte Black
- ✔️ Design: Vehicle-Specific Fit
- ✔️ Purpose: Wider Guard Coverage & Tougher 4WD Appearance
- ✔️ Installation: Mounting Hardware Included
Tougher Look with Wider Guard Coverage
Upgrade your Ford Ranger PX3 with this 6-piece pocket style fender flare set, designed to deliver a tougher, wider and more aggressive 4WD appearance.
With approximately 35mm wider coverage, these flares help provide extra guard coverage for wider wheels and tyres while improving the overall stance of the vehicle.
Made from tough automotive-grade ABS plastic, the flares are built for daily driving, touring and off-road-style builds. The matte black finish can be fitted as-is or professionally painted to match your vehicle if desired.
Key Features
💪 Tough ABS Material
Made from strong automotive-grade ABS plastic for durability, flexibility and everyday use.
📏 Approx. 35mm Wider Coverage
Provides a wider guard appearance and helps improve coverage for wider wheel and tyre setups.
🚘 Bold Pocket Style Design
Pocket-style flare design adds a rugged and aggressive 4WD look to the Ranger PX3.
🎯 Vehicle-Specific Fit
Designed to follow the guard shape of compatible Ranger PX3 models for a clean integrated fit.
🛠️ Mounting Hardware Included
Supplied with mounting hardware as shown or supplied. Professional installation is recommended for best results.
📋 Detailed Specifications
| Compatible Vehicle |
Ford Ranger PX3 |
| Compatible Years |
2018–2021 |
| Product Type |
Pocket Style Fender Flares |
| Quantity |
6 Pieces |
| Approx. Extent |
35mm |
| Material |
Automotive-Grade ABS Plastic |
| Finish |
Matte Black |
| Installation |
Mounting Hardware Included |
📦 Package Includes
- 6 × Pocket Style Fender Flares
- Mounting Hardware as Supplied
- Edge Trim / Accessories as Supplied
Please inspect all pieces and test-fit before installation.
Important Fitment Information
- Designed for selected Ford Ranger PX3 models from 2018 to 2021.
- Not suitable for PX1, PX2 or Next-Gen Ranger 2022+ models.
- May not suit Ranger Raptor or vehicles with different factory flare/guard designs unless fitment has been confirmed.
- Please compare your guard shape, bumper edges and body style with the listing photos before ordering.
- Existing body damage, previous guard repairs or aftermarket accessories may affect installation.
- Vehicles with modified guards, cut guards or non-standard body panels may require adjustment.
- Professional installation is recommended.
🔧 Installation Notes
These fender flares are designed to be fitted to the exterior wheel arch area using the supplied mounting hardware. Test fitting is essential before final installation.
- Test-fit each flare and confirm its position before installation.
- Clean the wheel arch mounting area thoroughly.
- Check alignment against the guard, bumper edge and door gaps.
- Install any supplied edge trim or accessories as required.
- Secure the flares using the supplied mounting hardware.
- Check all mounting points before driving.
- Recheck all fasteners after the first few drives.
Important Installation Notes:
- Professional installation is strongly recommended.
- Minor drilling, trimming or adjustment may be required depending on vehicle condition and setup.
- Do not fully tighten until all pieces are aligned correctly.
- Check tyre-to-flare clearance before driving.
- Ensure your wheel and tyre setup complies with local road regulations.
Frequently Asked Questions
Q: Is this a full set?
A: Yes. This listing is for a 6-piece fender flare set.
Q: How wide are the flares?
A: They provide approximately 35mm of wider coverage / extent.
Q: What material are they made from?
A: They are made from tough automotive-grade ABS plastic.
Q: Are they painted?
A: They come in a matte black finish. They may be professionally painted if required after proper surface preparation.
Q: Will these fit PX1, PX2 or Next-Gen Ranger?
A: No. This listing is intended for compatible Ranger PX3 2018–2021 models only.
Q: Will these fit Ranger Raptor?
A: Ranger Raptor may have a different factory flare and guard setup. Please confirm fitment before ordering.
Q: Is drilling required?
A: Installation depends on vehicle condition and existing mounting points. Minor drilling or adjustment may be required. Professional installation is recommended.
Q: Will this cover wider tyres?
A: The flares provide approximately 35mm extra coverage, but actual tyre coverage depends on wheel offset, tyre size, lift height and vehicle setup.
Q: Are the pocket bolts functional?
A: Pocket-style designs are mainly for appearance. Please refer to the supplied hardware and actual product design for installation.
🛡️ Warranty Information
This product is covered against manufacturing defects under our applicable warranty policy.
The warranty does not cover incorrect fitment, poor installation, drilling mistakes, trimming mistakes, impact damage, off-road damage, vehicle modification, paintwork, colour matching or normal wear and tear.
🚚 Shipping & Returns
Fast Dispatch: Orders are generally processed and dispatched within 24–48 business hours.
Oversized Item Notice: Due to the size of this product, some regional or remote areas may require additional postage charges depending on courier availability and delivery location.
Inspect Before Installation: Please inspect and test-fit all pieces before drilling, trimming, painting or installing.
Returns: Products that have been installed, drilled, trimmed, painted, marked or damaged may not be eligible for change-of-mind return. Please contact us before returning an item.
